Zenner CARTRIDGE METERS MNK-MF Uživatelský manuál Strana 1

Procházejte online nebo si stáhněte Uživatelský manuál pro Měřící nástroje Zenner CARTRIDGE METERS MNK-MF. ZENNER CARTRIDGE METERS MNK-MF Manuel d'utilisation Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 2
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
EnergyMetering
Installation manual cartridge meters - Manifold
Notice d’installation à cartouche - manifold
G
eneral notes
Read these instructions carefully right up to the end!
Water meters are precision instruments. Protect against
shock and vibration. Store frost-free
The sealing surface and thread is equipped with protec-
tion cap
Check and ensure before beginning the
installation:
That the sealing surfaces are at and free from damage
such as notches, grooves, etc.
That all indications on the dial are readable
The meter ts in type, size, temperature and pressure
rating to the installation and metering point
For polluted water we recommend installing of a lter or
strainer in the inlet; before the meter is be installed
The meter should always be installed at the lowest
possible point of the piping as well as frost protected, to
prevent the accumulation of air and damages
The water meter must be installed into the pipeline free
of any of mechanical forces or tensions
Water meters must be operating completely lled
with water - for wet dial meters this includes also the
counter!
The meter must be protected with appropriate measures
against pressure shocks in the pipeline
In case of frost empty completely and shut off the instal-
lation (including the meter), if necessary, dismount the
meter
The meter must always be easily accessible and legible.
The dial and the indications regarding the conformity/
metrology must be visible and readable at any time
We recommend that the installation points on the
pipeline should be secured with a seal against unauthor-
ized dismounting. The seal should not be removable or
loosened without visible damage
The installation has to be done by qualied professional
personnel
Indications générales
Lire soigneusement ce manuel jusqu’à la n
Les compteurs d’eau sont des instruments de précision.
A protéger des chocs et vibrations. A conserver à l’abri
du gel
Les portées de joint sont équipées de capuchons de
protection pour d’éviter les détériorations Avant le
début de l’installation, il faut vérifier:
Que les portées de joint soient planes et non endomma-
gées (encoches, rainures etc.)
Que toutes les indications sur le cadran soient lisibles
Que le compteur corresponde à l’installation, au calibrage,
à la plage de température et à la pression du réseau
Pour des eaux chargées, il est conseillé d’installer des
ltres en amont du compteur
Le compteur doit toujours être installé sur le point le plus
bas possible de l’installation et hors gel pour éviter l’accu-
mulation d’air ou divers détériorations
Le compteur doit être installé dans la canalisation libre de
toute force mécanique
Le compteur d’eau doit être entièrement rempli d’eau -
ceci inclut également le totalisateur pour les compteurs à
cadran noyé!
Le compteur doit être protégé contre les coups de béliers
dans les réseaux
En cas de risque de gel, couper et vider entièrement (y
compris le compteur), si nécessaire démonter le compteur
Le compteur doit toujours être facilement accessible et
lisible
Le cadran et les indications relatives à la marque de
conformité et métrologique doivent être visibles et lisibles
à tout moment.
Nous recommandons de sécuriser les points d’installation
sur la canalisation au moyen d’un sceau pour éviter toutes
manipulations. Ce sceau ne doit pas être démonté ou
desserré sans dommage visible
L’installation doit être effectué par du personnel qualié
Zobrazit stránku 0
1 2

Shrnutí obsahu

Strany 1 - EnergyMetering

EnergyMeteringInstallation manual cartridge meters - ManifoldNotice d’installation à cartouche - manifoldGeneral notes Read these instructions care

Strany 2

EnergyMeteringDeclaration of conformity ZENNER International GmbH & Co. KG declares that the product with the number of the EC type-examina-tion

Příbuzné modely CARTRIDGE METERS RTKD-MF

Komentáře k této Příručce

Žádné komentáře